Asset Integrity Management

COLDSHIELD

 

Structural Repair Solution

 

ColdShield is a unique and patented technology, by COLDPAD, for the reinforcement of thinning structures, even under harsh conditions. It is done in a controlled, durable manner and with no hot work such as welding or grinding. It is designed to restore durably the original capacity in minimum time and with no production disruption.

 

Typical Applications on corroded FPSO hulls:

  • Deck & Side Shell & External Hull.
  • Longitudinal or Transverse Frames.
  • Crude Oil Tanks.
  • Sea Water Ballast Tanks.

ColdShield Repair Benefits

 

  • No welding or grinding – safe installation with no downtime.
  • Class approved alternative to “Crop & Renew” method.
  • Permanent status – Restores initial structural strength.
  • Extreme durability even under harsh environment.
  • Fast & qualified installation procedure for all weather conditions.
  • Very light footprint on existing structures (virtually no stress concentration, no residual stress).
  • Accreditation: Bureau Veritas and ABS class approved.

View ColdShield Data Sheet

Reinforcekit® 4D

 

Composite Wrap Repair System

REINFORCEKiT® 4D is an advanced permanent composite repair system for pipes suffering from external or internal corrosion, dents, weld defects or mechanical damages.

REINFORCEKiT® 4D is a wet lay-up system, wrapped helicoidally by external application around the pipe to bring the mechanical resistance to the damaged pipe section.

The original concept is an association of Kevlar® tape and specific bi-component epoxy resin which allows a safe and easy installation unlike any other products on the wrapping market.

This patented product is designed to restore pipe original integrity. There are no limits in terms of pressure, and it could be used without shutdown.

We use our proprietary software called Reinforcekit Engineering Analysis (R.E.A) to design the composite repair and define the material requirements in accordance with international standards.

This solution is made available through our partner, CVAREA, a local representative of 3X Engineering.

Composite Wrap Repair

 

  • Effective solutions for wide variety of pipework, pipeline and structural integrity issues
  • Can be applied to live systems with no impact on production
  • Fast, cost effective and easy to install – minimal facilities required
  • Worldwide independent accreditations (BV and TUV approval and ABS Design and Manufacturing)
  • Exceptional strength and adaptability of composites
  • Long term alternative to steel replacement

View REINFORCEKIT® 4D Data Sheet

Reinforcekit® 4D

REINFORCEKiT® PATCH is a REINFORCEKiT® 4D variation for damaged tanks and vessels suffering from internal or external damage. This is the solution for a lasting tank reinforcement (up to 20 years for external corrosion).

Based on REINFORCEKiT® 4D technology, this product is compliant with ISO 24.817 and ASME PCC-2 standards.

This permanent solution is made of Kevlar® patches and 3X bi-component epoxy resin. Engineering analysis and calculations are performed to ensure that the product is configured for each repair job. This solution can be used in all conditions.

The dimensions of the patch and the quantity of resin will depend on the defect (no limitation of defect size). The number of patch/layer will be determined using the REA software.

This solution is made available through our partner, CVAREA, a local representative of 3X Engineering.

REINFORCEKIT PATCH
Permanently Repair Damaged Tanks

 

  • Restore original integrity of tanks.
  • Reinforce damaged tank area.
  • Prevent from further corrosion and deterioration.
  • Onshore & offshore installations.
  • All tank design and diameters.
  • Compatible with most common fluids and gas.
  • Suitable for temperatures up to 150°C.
  • No defect size limitation.
  • No pressure limitation.
  • Permanent repair.
  • No overload on damaged tank.

View REINFORCEKIT® Data Sheet

STOPKIT® Emergency Leak Stop

It is today the only efficient leak repair system in the world which can be applied on high pressure leaks in few minutes.

Many O&G companies include the STOPKiT® in their EPRS (Emergency Pipe Repair System) stock for handling oil, gas or water leaks.

This revolutionary concept is an emergency response system and is available under several models (depending on hole diameter) and for various environments (onshore, offshore & subsea).

This solution is made available through our partner, CVAREA, a local representative of 3X Engineering.

STOPKIT Emergency Leak Stop

 

  • Seal pipe leaks online up to 10mm and 80 bar.
  • Seal pipe leaks online up to 50 mm and 30 bar.
  • Onshore, offshore, subsea.
  • Pipe Diameter from 4’’ to 56’’.
  • Temperature from -20°C to 80°C.
  • No shut down.
  • No additional load.
  • Quick installation by a single person.
  • Easy to store & no expiry date.

View STOPKIT® Data Sheet

TANKIT® Emergency Tank Repair

TANKiT® is a temporary reinforcement solution for damaged tanks and vessels suffering from internal or external damage up to 100mm hole size.

It is a multi-layered product using a cold-welded steel plate and Kevlar® patches impregnated with 3X specific resin.

This product can be used on various tank designs and suitable for tanks up to 20m diameter.

This solution is made available through our partner, CVAREA, a local representative of 3X Engineering.

TANKIT Emergency repair for damaged tank

 

  • Repair holes due to internal or external corrosion (up to 100mm hole)
  • Stop the corrosion.
  • Onshore & offshore installation.
  • Up to 20m tank diameter.
  • Up to 100 mm hole.
  • Temperature from 10°C to 60°C.
  • No engineering no calculation.
  • Cold welding system.
  • Quick installation.
  • Easy to store.

View TANKIT® Data Sheet

ROLLERKIT® Pipe & Support Protection

ROLLERKIT is a patented innovation for pipe and support protection against corrosion. It can be used as preventive or curative repair system.

ROLLERKiT has been engineered according to ASME B31.1. It is made of technopolymer PPS pads thermo-welded on glass fiber fabric and epoxy resin. The type of resin depends on the environmental conditions: onshore or subsea.

Pads are designed to support the weight of the pipe. Glass fiber fabric ensures the pads assembly, and applied with the resin on a corroded surface, it will stop the corrosion.

This solution is made available through our partner, CVAREA, a local representative of 3X Engineering.

ROLLERKIT®
Pipe & Support Protection

 

  • Protect the pipe at support area.
  • Avoid contact between pipe and trapped water.
  • Prevent from corrosion on pipe and support.
  • Avoid galvanic effects.
  • Onshore & offshore.
  • All pipe supports (steel concrete…).
  • Pipe diameter from 4’’ to 56’’.
  • Temperature range from -30C to 150C.
  • Friction area.
  • Long-term service lifetime.
  • Non-metallic solution.
  • Pipe integrity preserved.
  • Fast & easy installation.
  • Dual use – Preventive & Curative system.

View ROLLERKIT® Data Sheet

TRENTON WAX-TAPE®
Anti-Corrosion Tape

TRENTON WAX-TAPE® BRAND ANTICORROSION WRAPS ARE EXTREMELY EFFECTIVE AND UNIQUE IN THEIR ABILITY TO PROTECT YOUR PIPELINE RESOURCES.

Trenton’s Wax-Tape wraps use a blend of microcrystalline waxes and plasticizers and are thick, with no fillers. This translates into conformability to irregular fittings and compatibility with many types of materials. Wax-Tapes do not require sandblasting or special surface preparation before application.

Wax-Tape® wraps do not cure and form a rock-hard composition. The wraps conform to surfaces and provide a long-lasting protection. In fact, the wraps provide better protection than paint, and they do not require the surface preparation that is necessary when using paints and epoxies.

This solution is made available through our partner, CVAREA.

TRENTON WAX-TAPE® Anti-Corrosion Tape

 

  • Quick and easy to apply with minimal equipment requirements.
  • Can be applied to surfaces with minimal surface preparation.
  • Can be applied in high moisture conditions.
  • No hot work permit.
  • Can be applied on live pipe.
  • No curing time.
  • Non-toxic (No volatile organic components.)
  • Overground above ground.
  • Resistant to acid, salts and other soil organics over a wide range of PH.
  • High dielectric strength.
  • Excellent resistance to cathodic de-bonding.
  • DNV certificate.

Shallow Water
ROV Services

 

  • Spool metrology
  • Anode measurement (Ballast tank)
  • Chain measurement
  • Hull inspection
  • Marine growth thickness measurement
  • Marine Growth Removal Tool (SEAROV Patented)

ROV 3D Telemetry

 

3D Telemetry is a non-contact, non-destructive technology that digitally captures the shape of physical objects using a line of laser light. 3D laser scanners record data from the surface of an object to capture a physical object’s exact size and shape as a digital 3-dimensional representation.

  • ORUS 3D system (link)
  • Compact & easy to deploy
  • Cost-effective solution
  • Non-intrusive
  • Very high resolution
  • Applicable in harsh and turbid environment

CONNECT WITH US ON LINKEDIN

Smiley face